#PAGE_PARAMS# #ADS_HEAD_SCRIPTS# #MICRODATA#
preLekára.sk / Journals / Czech Dental Journal / 2022 - 1

ZIRCONIA CERAMICS: PROPERTIES AND CLASSIFICATION

Česká verzia

Authors: T. Kovalský;  I. Voborná;  E. Míšová;  M. Rosa;  V. Polanská;  M. Hepová;  J. Staněk
Authors place of work: Klinika zubního lékařství, Lékařská fakulta Univerzity Palackého a Fakultní nemocnice, Olomouc
Published in the journal: Česká stomatologie / Praktické zubní lékařství, ročník 122, 2022, 1, s. 11-16
Category: Review Article
doi: https://doi.org/10.51479/cspzl.2022.002

Review

Summary

Introduction and aim: Zirconia is currently the most commonly used representative of polycrystalline dental ceramics. It is highly valued for its mechanical properties: hardness, strength and toughness. On the contrary, its aesthetics is percieved as a disadvantage. Its insufficient transparency makes it impossible to mimic the optical properties of enamel, and therefore its indication in monolithic form is often limited to distal sections only. This article discusses the properties of zirconia ceramics and its evolution. Particular emphasis is placed on the chemical-physical nature of the phenomena involved in determining the properties of dental zirconia.

Conclusion: The economic potential of zirconia ceramics is proving to be a strong stimulant of its development. The aesthetic disadvantages of the material were the biggest limiting factor for its wider use. The simplest and earliest solution to this problem was the veneering of zirconia using high glass content ceramics. This combination of materials, however, was found to have relatively frequent complications associated with chipping of the surface layers of the veneer. The use of zirconia ceramics in monolithic form proved to be the most advantageous from a mechanical point of view. Therefore, the development of zirconia ceramics in the last ten years has gone in the direction of increasing the transparency of the zirconia ceramic itself. The result of these efforts has been the latest generation of zirconia ceramics, which have significantly improved aesthetics and can be used even in relatively aesthetically exposed areas. These new materials retain only a fraction of the mechanical durability of their predecessors, and therefore their indications are limited to three-unit bridges. However, they still significantly expand the portfolio of applications for monolithic zirconia ceramics and are becoming a suitable alternative to older materials used for crown and bridge fabrication.

Keywords:

polymorphism – zirconia ceramic – zirconia – metastability – transformation toughening – low temperature degradation – 3Y-TZP – 4Y-TZP – 5Y-TZP

Zdroje
  1. Mounajjed R, Šoukalová H, Azar B, Černý D, Hammal M. Celokeramické náhrady. Čes stomatol Prakt zubní lék. 2018; 118(4): 90–94.
  2. Tabatabaian F. Color aspect of monolithic zirconia restorations: A review of the literature. J Prosthodont. 2019; 28(3): 276–287.
  3. Brizuela-Velasco A, Diéguez-Pereira M,Álvarez-Arenal Á, Chávarri-Prado D, Solaberrieta E, Fernández-González FJ, Chento-Valiente Y, Santamaría-Arrieta G.Fracture resistance of monolithic high translucency zirconia implant-supported crowns. Implant Dent. 2016; 25(5): 624–628.
  4. Wang F, Takahashi H, Iwasaki N. Translucency of dental ceramics with different thicknesses. J Prosthet Dent. 2013; 110(1): 14–20.
  5. Jurišić S, Jurišić G, Zlatarić DK. In vitro evaluation and comparison of the translucency of two different all-ceramic systems. Acta Stomatol Croat. 2015; 49(3): 195–203.
  6. Zhang Y, Lawn BR. Novel zirconia materials in dentistry. J Dent Res. 2018; 97(2): 140–147.
  7. Stevenson A. (ed.) Oxford Dictionary of English. 3rd edition. Oxford: Oxford University Press; 2010, 2066.
  8. Krebs R, Robert E. The history and use of our earth's chemical elements. Westport, Connecticut: Greenwood Press; 1998, 98–100.
  9. Subbarao EC. Zirconia-an overview. In: Heuer AH, Hobbs LW, editors. Science and technology of zirconia. Columbus, OH: The American Ceramic Society; 1981, 1–24.
  10. Kisi E, Howard C. Crystal structures of zirconia phases and their interrelation. Key Eng Mater. 1998; 153/154: 1–35.
  11. Kelly JR, Denry I. Stabilized zirconia as a structural ceramic: an overview. Dent Mater. 2008; 24(3): 289–298.
  12. Evans AG, Heuer AH. Review – transformation toughening in ceramics: martensitic transformations in crack-tip stress fields. J Am Ceram Soc. 1980; 63(5–6): 241–248.
  13. Stawarczyk B, Keul C, Eichberger M, Figge D, Edelhoff D, Lümkemann N. Three generations of zirconia: From veneered to monolithic. Part I. Quintessence Int. 2017; 48(5): 369–380.
  14. Zarone F, Di Mauro MI, Ausiello P, Ruggiero G, Sorrentino R. Current status on lithium disilicate and zirconia: a narrative review. BMC Oral Health. 2019; 19(1): 134.
  15. Zarone F, Russo S, Sorrentino R. From porcelain-fused-to-metal to zirconia: clinical and experimental considerations. Dent Mater. 2011; 27(1): 83–96.
  16. Zhu J, Luo J, Sun Y. Study of the fracture behavior of tetragonal zirconia polycrystal with a modified phase field model. Materials (Basel). 2020; 13(19): 4430.
  17. Kobayashi K, Kuwajima H, Masaki T. Phase change and mechanical properties of ZrO2-Y2O3 solid electrolyte after ageing. Solid State Ion. 1981; 3–4: 489–493.
  18. Chen YW, Moussi J, Drury JL, Wataha JC.Zirconia in biomedical applications. Expert Rev Med Devices. 2016; 13(10): 945–963.
  19. Sorrentino R, Navarra CO, Di Lenarda R, Breschi L, Zarone F, Cadenaro M, Spagnuolo G. Effects of finish line design and fatigue cyclic loading on phase transformation of zirconia dental ceramics: A qualitative micro-raman spectroscopic analysis. Materials (Basel). 2019; 12(6): 863.
  20. Camposilvan E, Leone R, Gremillard L, Sorrentino R, Zarone F, Ferrari M, Chevalier J. Aging resistance, mechanical properties and translucency of different yttria-stabilized zirconia ceramics for monolithic dental crown applications. Dent Mater. 2018; 34(6): 879–890.
  21. Mota YA, Cotes C, Carvalho RF, Machado JPB, Leite FPP, Souza ROA, Özcan M. Monoclinic phase transformation and mechanical durability of zirconia ceramic after fatigue and autoclave aging. J Biomed Mater Res B Appl Biomater. 2017; 105(7): 1972–1977.
  22. Yang H, Xu YL, Hong G, Yu H. Effects of low-temperature degradation on the surface roughness of yttria-stabilized tetragonal zirconia polycrystal ceramics: A systematic review and meta-analysis. J Prosthet Dent. 2021; 125(2): 222–230.
  23. Pereira GKR, Venturini AB, Silvestri T, Dapieve KS, Montagner AF, Soares FZM, Valandro LF. Low-temperature degradation of Y-TZP ceramics: A systematic review and meta-analysis. J Mech Behav Biomed Mater. 2015; 55: 151–163.
  24. International Organization for Standardization. ISO 6872:2015. [cit. 27. 7. 2021] Dostupné z: https://www.iso.org/obp/ui/#iso:std:iso:6872:ed-4:v1:en nebo https://www.sis.se/api/document/preview/918954
  25. Pang Z, Chughtai A, Sailer I, Zhang Y. A fractographic study of clinically retrieved zirconia-ceramic and metal-ceramic fixed dental prostheses. Dent Mater. 2015; 31(10): 1198–1206. 
  26. Larsson C, Vult von Steyern P. Implant-supported full-arch zirconia-based mandibular fixed dental prostheses. Eight-year results from a clinical pilot study. Acta Odontol Scand. 2013; 71(5): 1118–1222.
  27. Sax C, Hämmerle CH, Sailer I. 10-year clinical outcomes of fixed dental prostheses with zirconia frameworks. Int J Comput Dent. 2011; 14(3): 183–202.
  28. Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T. Current status of zirconia restoration. J Prosthodont Res. 2013; 57(4): 236–261.
  29. Felberg RV, Bassani R, Pereira GKR, Bacchi A, Silva-Sousa YTC, Gomes EA, Sarkis-Onofre R, Spazzin AO. Restorative possibilities using zirconia ceramics for single crowns. Braz Dent J. 2019; 30(5): 446–452.
  30. Tong H, Tanaka CB, Kaizer MR, Zhang Y. Characterization of three commercial Y-TZP ceramics produced for their high-translucency, high-strength and high-surface area. Ceram Int. 2016; 42(1 Pt B): 1077–1085.
  31. Alraheam IA, Donovan T, Boushell L, Cook R, Ritter AV, Sulaiman TA. Fracture load of two thicknesses of different zirconia types after fatiguing and thermocycling. J Prosthet Dent. 2020; 123(4): 635–640.
  32. Jerman E, Lümkemann N, Eichberger M, Zoller C, Nothelfer S, Kienle A, Stawarczyk B. Evaluation of translucency, Marten's hardness, biaxial flexural strength and fracture toughness of 3Y-TZP, 4Y-TZP and 5Y-TZP materials. Dent Mater. 2021; 37(2): 212–222.
  33. Mao L, Kaizer MR, Zhao M, Guo B,Song YF, Zhang Y. Graded ultra-translucent zirconia (5Y-PSZ) for strength and functionalities. J Dent Res. 2018; 97(11): 1222–1228.
  34. Holman CD, Lien W, Gallardo FF, Vandewalle KS. Assessing flexural strength degradation of new cubic containing zirconia materials. J Contemp Dent Pract. 2020; 21(2): 114–118.
Štítky
Maxillofacial surgery Orthodontics Dental medicine
Článek Editorial
Článek Změna na postu šéfredaktora časopisu Česká stomatologie a praktické zubní lékařství
Článek IN MEMORIAM DOC. MUDr. IVO DŘÍZHAL, CSc.
Článek HISTOLOGICAL EXAMINATION OF THE LINGUAL FRENULUM IN PATIENTS WITH ANKYLOGLOSSIA
Článek EROSIVE EFFECT OF ACIDIC BEVERAGES ON THE SURFACE OF FILLING MATERIALS
Článok vyšiel v časopise

Czech Dental Journal

Číslo 1
2022 Číslo 1
Najčítanejšie tento týždeň
Najčítanejšie v tomto čísle
Prihlásenie
Zabudnuté heslo

Zadajte e-mailovú adresu, s ktorou ste vytvárali účet. Budú Vám na ňu zasielané informácie k nastaveniu nového hesla.

Prihlásenie

Nemáte účet?  Registrujte sa

#ADS_BOTTOM_SCRIPTS#