Study of local anaesthetics: Part 201*
Determination of the critical micellar concentration of pentacaine hydrochloride from the measurements of UV absorption of pyrene in methanol solutions

Summary

The formation of micelles of the local anaesthetic pentacaine hydrochloride (K 1902) in methanol solutions at two concentrations was investigated by measuring the absorbance of pyrene in surfactant solution. The absorbance vs. surfactant concentration profiles for all the major UV spectral peaks of pyrene have been found to be sigmoidal in nature which were analyzed according to Sigmoidal-Boltzmann equation to evaluate the cmcs values of the studied systems. The influence of the methanol concentration on the critical micellar concentration was studied. The observed critical micellar concentration rises with an increasing of alcohol.

Keywords:
local anaesthetic • pentacaine hydrochloride • critical micellar concentration • pyrene absorption • Sigmoidal-Boltzmann equation • methanol

Introduction

Surfactants are molecules made up of two distinct particles, one with a strong affinity for oils and the other for water. When dissolved in water, they lower the surface tension of the water and increase the solubility of organic compounds. It is known that surfactants can assemble in solution and critical micellar concentration (cmc) is an important solution property of surfactants¹⁾.

The process of self-association of surfactants into micelles, vesicles and membranes play a very important role in many areas, ranging from biological systems to technical applications²⁾.

Several techniques are used, such as NMR, surface tension, conductometry, light scattering and calorimetry, to determine cmc^3-8) and bulk thermodynamic properties such as the aggregation number^9-11). In addition, spectral methods like UV-VIS and fluorescence using other compounds as probes are also used for the evaluation of cmc^{1, 12)}.

The effect of the presence of additives on the critical micelle concentration of surfactants has been widely studied^13-15). Increasing attention is being devoted to the study of the incorporation or solubilization of neutral molecules into micelles in aqueous solution. Some of the most widely studied solubilizates are alcohols because of the important role they have in the preparation of microemulsions^16-19). It is generally accepted that the alcohol binds to the micelle in the surface region leading to three principal effects¹⁹⁾:1. The alcohol molecules intercalate between the surface ionic head groups to decrease the micelle surface area per head groups and increase of ionization. 2. The dielectric constant at the micellar interface decrease probably due to the replacement of water molecules in the interface region by alcohol molecules. 3. The molecular order of the interface region of the micelle changes.

In this article, we have found that the UV-VIS spectroscopy technique (pyrene absorption spectra) is a suitable method for the determination of the cmc of the methanol solutions containing surfactant pentacaine hydrochloride.

Experimental part

Materials and Methods

The surfactant of the cationic local anaesthetic pentacaine hydrochloride (K 1902) was synthesized according to Beneš et al.²⁰⁾. Methanol and ethanol used in the present study were obtained from Merck. Pyrene was purchased from Sigma-Aldrich, Switzerland. Laboratory temperature throughout the experiment was 25 °C. The critical micellar concentrations were determined by a method of Basu Ray et al.¹⁾.

Preparation of pyrene solution

The pyrene stock solution with a concentration of 0.0012 mol/l was prepared by adding a known weight of the compound in 20 wt% ethanol in water. The mixture was sonicated in order to yield a clear solution. The experimental 2 ∝mol/l solution of pyrene was prepared from it by dilution wherein the ethanol concentration was 0.25%. Such a small concentration of the ethanol was considered unable to affect the spectral and self-aggregation behavior of amphiphiles.

Absorbance study

Absorbance measurements were taken in a UV-VIS spectrophotometer Spekol 1300 Analytic Jena AG (Germany) using 10 mm path length quartz cuvette. The spectra were recorded in the 200–400 nm wavelength range.

Results and discussion

The absorption spectrum of pyrene (2 μmol/l) in water-methanol solution is illustrated in Figure 1. The absorption spectra have evidenced eight²¹⁾ peaks strong (s) and weak (w) at 232^w, 242^w, 252^w, 260^w, 272^s, 308^w, 320^s and 336^s nm as depicted in Figure 1. The concentration of used pyrene was 2 μmol/l, which was within its solubility limit of 2–3 μmol/l22). At this concentration excimer formation was expected to be absent²²⁾.

In water-methanol solution, the pyrene absorption peaks 232, 242, 252, 260, 272 and 308 nm of pyrene were not observed. Probably, this was due to strong absorption of K 1902 in the near UV region, which masked the peaks of pyrene in question. Figs. 2 and 3 show the pyrene plots of the sum of absorbances of two peaks (320 and 336 nm) A_T versus the concentration of surfactant K 1902 in solvent systems. The shapes were all of sigmoidal character. Fitting them to the Sigmoidal-Boltzmann equation (SBE) was herein used for cmc calculation.

          [1]

Hence, where x is the total concentration of surfactant, a_i and a_f are the initial and final asymptotes of the sigmoid, respectively, x₀ is the center of the sigmoid, and Δx is the interval of the independent variable x. They have designed that the sigmoidal plot can create two cmcs, one at x₀ and the second at x₀ + 2 Δx. Farther, the ratio x₀ /Δx can be a guide to decide upon for the choice of the right cmc between the two. The surfactant systems that provide Δx₀ /Δx < 10 produce cmc1 = x₀ those which yield Δx₀ /Δx > 10 by the SBE process produce cmc2 = (Δx₀ + 2Δx). The cmc1 and cmc2 values thus determined for two concentrations of methanol (0.2 and 0.3 mol/l) and the most significant fit parameters for surfactant systems studied, including the number of points used in the fit (n), regression-square (r²) and the chi-square (χ²) are presented in the Table 1. The absorption data treated by the above equation and analyzed in compliance with the suggestion of Aguiar et al.12) have produced x₀ /Δx values much lower than 10, so that the cmc values were taken equal to x₀ as discussed above. The concentrations of methanol solutions (0.2 and 0.3 mol/l) were chosen because substance K 1902 is practically insoluble in water, respectively in 0.1 mol/l methanol. Experimental results show (Table 1) that, with increasing concentration of methanol solution from 0.2 to 0.3 mol/l, we observed an increase in the value of cmc. We assume that with increasing alcohol concentration higher than 0.3 mol/l, we would find increased cmc values ​​as found by other authors^{13, 15, 23)}.

Conclusion

• UV absorption of pyrene in surfactant solution can be an easy method to establish their cmc as described in the work¹⁾;
• cmc value increases with increasing concentration of methanol.

Conflicts of interest: none.

Received 31 Januar 2013 / Accepted 19 March 2013

PharmDr. Jana Gališinová (∗) • F. Andriamainty • I. Malík • J. Čižmárik • Ľ. Sichrovská

Comenius University in Bratislava, Faculty of Pharmacy

Department of Pharmaceutical Chemistry

Odbojárov 10, 832 32 Bratislava, Slovak Republic

e-mail: galisinova@fpharm.uniba.sk