Optimization of spray-dried porous microparticles preparation for pulmonary delivery
Authors:
Andrea Peštálová; Hana Hořavová; Jan Gajdziok
Published in the journal:
Čes. slov. Farm., 2023; 72, 132-140
Category:
Original Article
doi:
https://doi.org/10.5817/CSF2023-3-132
Summary
Inhalation administration of dry powder particles is a common application route to achieve local and systemic drug effects. For pulmonary diseases, the deposition of drugs at the site of action is desirable. Thus, the parameters of the inhaled particles, especially their size, shape, or aerosolization, are essential for effective treatment. Suitable parameters can be achieved by choice of preparation method or excipients (carriers, porogens, or aerosolizing agents). This experiment aimed to prepare 11 batches of powder mixtures by spray drying, which differed in the carrier used and the amount of leucine or porogen. The aim was to optimize the formulation for drug binding concerning the requirements for pulmonary administration. The prepared particles were evaluated in terms of morphology, flow properties, porosity, and geometric and aerodynamic diameter. It was found that with increasing concentration of leucine, the bulk density of the particles decreased while the FPF value increased. Similarly, there was a decrease in MMAD. The batch containing 15% leucine was the most suitable. In determining the optimum porogen concentration for mannitol particles, the batch with its 1% gave the best results due to its adequate particle size compared to the other batches (MMAD 5.92 ± 1.32 μm), suitable porosity, and particle morphology. Thus, to formulate drug-loaded particles, it would be advisable to reduce the aerodynamic diameter of the particles, e.g., by spray drying process parameters.
Keywords:
microparticles – Leucine – inhalation administration – spray drying – porogens
Zdroje
1. Hořavová H., Gajdziok J., Vetchý D. Typy a příprava lipozomálních přípravků pro plicní podání. Chem. Listy. 2020; 114, 322–328.
2. Edwards D., A., Ben-Jebria A., Langer R. Recent advances in pulmonary drug delivery using large, porous inhaled particles. J. Appl. Physiol. 1998; 85, 379–385.
3. Liang Z., Ni R., Zhou J., Mao S. Recent advances in controlled pulmonary drug delivery. Drug Discov. Today 2015; 20, 380–389.
4. Karas J., Vetchý D., Gajdziok J. Dry powder particles for pulmonary application. Chem. Listy 2022; 116, 28–34.
5. Gharse S., Fiegel J. Large porous hollow particles: lightweight champions of pulmonary drug delivery. Curr. Pharm. Des. 2016; 22, 2463–2469.
6. Edwards D. A., Hanes J., Caponetti G., Hrkach J., Ben-Jebria A., Eskew M. L., Langer R. Large porous particles for pulmonary drug delivery. Science 1997; 276, 1868–1872.
7. Yang Y., Bajaj N., Xu P., Ohn K., Tsifansky M. D., Yeo Y. Development of highly porous large PLGA microparticles for pulmonary drug delivery. Biomaterials 2009; 30, 1947–1953.
8. Cai Y., Chen Y., Hong X., Liu Z., Yuan W. Porous microsphere and its applications. Int. J. Nanomedicine 2013; 8, 1111–1120.
9. Kim H. U., Park H. I., Lee J. H., Lee E. S., Oh K. T., Yoon J. H., Youn Y. S. Pharmaceutical potential of gelatin as a pH-responsive porogen for manufacturing porous poly (D, L-lactic-co-glycolic acid) microspheres. Int. J. Pharm. Investig. 2010; 40, 245–250.
10. Nasr M., Awad G. A., Mansour S., Al Shamy A., Mortada N. D. Hydrophilic versus hydrophobic porogens for engineering of poly (lactide-co-glycolide) microparticles containing risedronate sodium. Pharm. Dev. Technol. 2013; 18, 1078–1088.
11. Emami F., Vatanara A., Vakhshiteh F., Kim Y., Kim T. W., Na D. H. Amino acid-based stable adalimumab formulation in spray freeze-dried microparticles for pulmonary delivery. J. Drug Deliv. Sci. Tech. 2019; 54, 101–249.
12. Hoe S., Matinkhoo S., Boraey M., Ivey J., Shamsaddini-Shahrbabak A., Finlay W. H., Vehring R. Substitution of L-Leucine with D-Leucine in spray-dried respirable powders for control of Pseudomonas aeruginosa infection. In: 19th International Congress. International Society for Aerosols in Medicine. North Carolina USA: 2013.
13. Schoubben A., Vivani R., Paolantoni M., Perinelli D. R., Gioiello A., Macchiarulo A., Ricci M. D-leucine microparticles as an excipient to improve the aerosolization performances of dry powders for inhalation. Eur. J. Pharm. Sci. 2019; 130, 54–64.
14. Prota L., Santoro A., Bifulco M., Aquino R. P., Mencherini T., Russo P. Leucine enhances aerosol performance of naringin dry powder and its activity on cystic fibrosis airway epithelial cells. Int. J. Pharm. 2011; 412, 8–19.
15. Český lékopis. 1. vydání. Praha: Grada Publishing 2017.
16. Ungaro F., Giovino C., Coletta C., Sorrentino R., Miro A., Quaglia F. Engineering gas-foamed large porous particles for efficient local delivery of macromolecules to the lung. Eur. J. Pharm. Sci. 2010; 41, 60–70.
17. You Y., Zhao M., Liu G., Tang X. Physical characteristics and aerosolization performance of insulin dry powders for inhalation prepared by a spray drying method. J. Pharm. Pharmacol. 2007; 59, 927–934.
18. Zhou Q. T., Morton D. A., Heidi H. Y., Jacob J., Wang J., Li J., Chan H. K. Colistin powders with high aerosolisation efficiency for respiratory infection: preparation and in vitro evaluation. J. Pharm. Sci. 2013; 102, 3736–3747.
19. Jong T., Li J., Morton D. A., Zhou Q. T., Larson I. Investigation of the changes in aerosolization behavior between the jet-milled and spray-dried colistin powders through surface energy characterization. J. Pharm. Sci. 2016; 105, 1156–1163.
20. Chvatal A., Ambrus R., Party P., Katona G., Jójárt-Laczkovich O., Szabó-Révész P., Tsapis N. Formulation and comparison of spray dried non-porous and large porous particles containing meloxicam for pulmonary drug delivery. Int. J. Pharm. 2019; 559, 68–75.
21. Li J., Zheng H., Qin L., Xu E. Y., Yang L., Zhang L., Mao S. In vitro – in vivo correlation of inhalable budesonide-loaded large porous particles for sustained treatment regimen of asthma. Acta Biomater. 2019; 96, 505–516.
22. Lamy B., Serrano D. R., O’connell P., Couet W., Marchand S., Healy A. M., Tewes F. Use of leucine to improve aerodynamic properties of ciprofloxacin-loaded maltose microparticles for inhalation. Eur. J. Pharm. Res. 2019; 1, 2–11.
Štítky
Pharmacy Clinical pharmacologyČlánok vyšiel v časopise
Czech and Slovak Pharmacy
2023 Číslo 3
Najčítanejšie v tomto čísle
- Comparison of the preparation of the radiopharmaceutical 68Ga-PSMA-11 at two Czech worksites
- High vs. low-dose leucovorin in regimens with fluorouracil in colorectal cancer therapy
- Terapeutické monitorovanie liečiv 2023
- A study of hypoglycemic activity of acids and salts containing 1,2,4-triazole