Measurement of finger joint angle using stretchable carbon nanotube strain sensor
Autoři:
Jin Woo Park aff001; Taehoon Kim aff002; Daesik Kim aff002; Yongtaek Hong aff002; Hyun Sik Gong aff003
Působiště autorů:
Department of Orthopaedic Surgery, Kangwon National University College of Medicine, Chuncheon, Korea
aff001; Department of Electrical and Computer Engineering, Inter-University Semiconductor Research Center (ISRC), Seoul National University, Seoul, Korea
aff002; Department of Orthopaedic Surgery, Seoul National University College of Medicine, Seoul, Korea
aff003
Vyšlo v časopise:
PLoS ONE 14(11)
Kategorie:
Research Article
prolekare.web.journal.doi_sk:
https://doi.org/10.1371/journal.pone.0225164
Souhrn
Strain sensors capable of monitoring complex human motions are highly desirable for the development of wearable electronic devices and healthcare monitoring systems. Excellent sensitivity and a wide working range of the sensor material are important requirements for distinguishing dynamic human motion. In this study, a highly stretchable strain sensor was fabricated via inkjet printing of single-walled carbon nanotube (SWCNT) thin films on a stretchable polydimethylsiloxane substrate. The sensor was attached to the metacarpophalangeal (MCP) joint of the hand in 12 healthy male subjects. The subjects placed their hands next to a conventional goniometer and flexed the MCP joint to predetermined angles. A linear relationship was found between the change in the length of the strain sensor and the intended angle of the MCP joint. The fabricated thin films showed high durability during repeated cycling (1,000 cycles) and good sensitivity with a gauge factor of 2.75. This study demonstrates that the newly developed stretchable CNT strain sensor can be used for effectively measuring MCP joint angles. This sensor may also be useful for the analysis of complex and dynamic hand motions that are difficult to measure using a conventional goniometer.
Klíčová slova:
Skin – Skeletal joints – Fingers – Manufacturing processes – Thin films – Humidity – Carbon nanotubes
Zdroje
1. Bazanski T. Metacarpophalangeal joint kinematics during a grip of everyday objects using the three-dimensional motion analysis system. Acta Bioeng Biomech. 2010;12(2):79–85. 20882945
2. Lee KS, Jung MC. Three-dimensional finger joint angles by hand posture and object properties. Ergonomics. 2016 Jul;59(7):890–900. doi: 10.1080/00140139.2015.1108458 26472250
3. Oess NP, Wanek J, Curt A. Design and evaluation of a low-cost instrumented glove for hand function assessment. J Neuroeng Rehabil. 2012 Jan 17;9:2. doi: 10.1186/1743-0003-9-2 22248160
4. Simone LK, Kamper DG. Design considerations for a wearable monitor to measure finger posture. J Neuroeng Rehabil. 2005 Mar 1;2(1):5. doi: 10.1186/1743-0003-2-5 15740622
5. Dipietro L, Sabatini AM, Dario P. Evaluation of an instrumented glove for hand-movement acquisition. J Rehabil Res Dev. 2003;40(2):179–189. 15077642
6. Amjadi M, Kyung KU, Park I, Sitti M. Stretchable, skin-mountable, and wearable strain sensors and their potential applications: A review. Adv Funct Mater. 2016;26(11):1678–1698.
7. Chortos A, Liu J, Bao Z. Pursuing prosthetic electronic skin. Nat Mater. 2016 Sep;15(9):937–950. doi: 10.1038/nmat4671 27376685
8. Yamada T, Hayamizu Y, Yamamoto Y, Yomogida Y, Izadi-Najafabadi A, Futaba DN, et al. A stretchable carbon nanotube strain sensor for human-motion detection. Nat Nanotechnol. 2011 May;6(5):296–301. doi: 10.1038/nnano.2011.36 21441912
9. Ryu S, Lee P, Chou JB, Xu R, Zhao R, Hart AJ, et al. Extremely elastic wearable carbon nanotube fiber strain sensor for monitoring of human motion. ACS Nano. 2015 Jun 03;9(6):5929–5936. doi: 10.1021/acsnano.5b00599 26038807
10. Cai L, Song L, Luan P, Zhang Q, Zhang N, Gao Q, et al. Super-stretchable, transparent carbon nanotube-based capacitive strain sensors for human motion detection. Sci Rep. 2013 Oct 25;3:3048. doi: 10.1038/srep03048 24157842
11. Kim JH, Hwang JY, Hwang HR, Kim HS, Lee JH, Seo JW, et al. Simple and cost-effective method of highly conductive and elastic carbon nanotube/polydimethylsiloxane composite for wearable electronics. Sci Rep. 2018 Jan 22;8:1375. doi: 10.1038/s41598-017-18209-w 29358581
12. Hu N, Karube Y, Arai M, Watanabe T, Yan C, Li Y, et al. Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor. Carbon. 2010 Mar;48(3):680–687.
13. Liu H, Gao J, Huang W, Dai K, Zheng G, Liu C, et al. Electrically conductive strain sensing polyurethane nanocomposites with synergistic carbon nanotubes and graphene bifillers. Nanoscale. 2016 May 27;8:12977–12989. doi: 10.1039/c6nr02216b 27304516
14. Kim T, Song H, Ha J, Kim S, Kim D, Chung S, et al. Inkjet-printed stretchable single-walled carbon nanotube electrodes with excellent mechanical properties. Appl Phys Lett. 2014;104:113103.
15. Chapleau J, Canet F, Petit Y, Laflamme GY, Rouleau DM. Validity of goniometric elbow measurements: Comparative study with a radiographic method. Clin Orthop Relat Res. 2011 Nov;469(11):3134–3140. doi: 10.1007/s11999-011-1986-8 21779866
16. Marks M, Herren DB, Vliet Vlieland TP, Simmen BR, Angst F, Goldhahn J. Determinants of patient satisfaction after orthopedic interventions to the hand: A review of the literature. J Hand Ther. 2011;24(4):303–312. doi: 10.1016/j.jht.2011.04.004 21684112
17. Kato M, Echigo A, Ohta H, Ishiai S, Aoki M, Tsubota S, et al. The accuracy of goniometric measurements of proximal interphalangeal joints in fresh cadavers: Comparison between methods of measurement, types of goniometers, and fingers. J Hand Ther. 2007;20(1):12–18. doi: 10.1197/j.jht.2006.11.015 17254904
18. Kim JH, Hwang JY, Hwang HR, Kim HS, Lee JH, Seo JW, et al. Simple and cost-effective method of highly conductive and elastic carbon nanotube/polydimethylsiloxane composite for wearable electronics. Sci Rep. 2018 Jan 22;8(1):1375. doi: 10.1038/s41598-017-18209-w 29358581
19. Wessendorf AM, Newman DJ. Dynamic understanding of human-skin movement and strain-field analysis. IEEE Trans Biomed Eng. 2012 Dec;59(12):3432–3438. doi: 10.1109/TBME.2012.2215859 22961262
20. Chen J, Zheng J, Gao Q, Zhang J, Zhang J, Omisore OM, et al. Polydimethylsiloxane(PDMS)–based flexible resistive strain sensors for wearable applications. Appl Sci. 2018;8(3):345.
21. Tortorich RP, Choi JW. Inkjet printing of carbon nanotubes. Nanomaterials (Basel). 2013 Sep;3(3):453–468.
Článok vyšiel v časopise
PLOS One
2019 Číslo 11
- Metamizol jako analgetikum první volby: kdy, pro koho, jak a proč?
- Nejasný stín na plicích – kazuistika
- Masturbační chování žen v ČR − dotazníková studie
- Úspěšná resuscitativní thorakotomie v přednemocniční neodkladné péči
- Dlouhodobá recidiva a komplikace spojené s elektivní operací břišní kýly
Najčítanejšie v tomto čísle
- A daily diary study on maladaptive daydreaming, mind wandering, and sleep disturbances: Examining within-person and between-persons relations
- A 3’ UTR SNP rs885863, a cis-eQTL for the circadian gene VIPR2 and lincRNA 689, is associated with opioid addiction
- A substitution mutation in a conserved domain of mammalian acetate-dependent acetyl CoA synthetase 2 results in destabilized protein and impaired HIF-2 signaling
- Molecular validation of clinical Pantoea isolates identified by MALDI-TOF